Vinyl Banners are an effective way to promote grand openings, trade shows and sales events. Our durable, excellent quality banners are also perfect for building signs, expos, item promotion, exhibits, special occasions, corporate events and any other display purpose.
Full color high resolution vinyl banners are great for promotions or special events.

Preparing your Large Format Files : Create your file in CMYK mode with a resolution of 150dpi.
If you file has been created in RGB or includes RGB objects, we recommend converting the file to CMYK.
Your artwork should reflect only what you need to be printed in the final product. Do not include bleeding or crop marks in your artwork and make certain is sent in the same size as you have ordered or in the same ratio.
When selecting Hemming, leave a 1.25in safe area within your finalized artwork. This area is where the hemming will go over the banner (Make sure there is no important text or logos in this area).
In order to provide you the fastest turn around, all artworks for Large Format products are sent directly to press and we do not have a PDF proof option available. We will not be responsible for any reprints if your file is sent in a different size or ratio other than the measurements specified in your order.
If you are working with vector images (in programs like Adobe Illustrator), the final size artwork is not necessary unless you have placed photographs into your document. Then the above guidelines will apply.
All fonts should be converted to curves or outlines. We suggest your files to be flatten or rasterized if possible to minimize the file size.
We accept the following file formats: EPS, TIF, PSD, & PDF files. JPG files are accepted, but they must be prepared properly (It's strongly suggested that the JPG is created the closest size possible to the final print size or at least in a 50% scale with 150dpi).

Grommets : For our grommets we use Silver Nickel Grommets Size #2 (3/4" outside diameter) with a hole diameter of 3/8"
Standard Grommets : Silver grommets will be evenly place along the edge of your banners on an average of every 3ft.
(Ex. A banner 8' X 4' would have 4 grommets on top and 4 grommets on bottom.)
4 Corners Grommets : Grommets are placed only on the 4 corners of the banner.
All Banners equal and smaller than 4ft x 2ft will only include grommets in the corners.

Pole Pockets : 1" Pole pockets are made by folding an extra 3 inches of blank media towards the back side of the banner and sewing it together. The 1" Pole Pocket accommodates for Poles or Rods up to 0.5" in diameter. The 2" Pole Pocket accommodates for Poles or Rods up to 1" in diameter. Pole pockets are made by folding an extra 3 inches of blank media towards the back side of the banner and sewing it together. Your artwork should include a "safety zone" of 3", within your final size, along the sides that the pole pocket will be created. Avoid any important text or logos in this area. If you have a white background on your artwork please include a bounding box with a gray 1pt stroke.
For 8 feet (height) banners please be advised that the pole pockets will reduce your final size 6 inches due to the pocket fold. Pole pockets longer than 8 feet may include an extra charge of $5.00.
If you need a pole pocket for a pole thicker than 1" please indicated in the Special Instructions Box at the time of uploading your artwork.

1. Measure the Height of the Base , if any, from the top of the upper pole to the bottom of the lower pole. (This Height will be your Final Size.This size)
2. Measure the thickness of the Pole.
3. After measuring the thickness of the pole, double that quantity and bleed out that measure on your artwork in the top and in the bottom.
4. The bleed out section on your artwork will be fold it backwards to create the pole pocket. Please make sure the fold will not cover any important information in the other side within your final size. Your safety area will be the same measure as the Bleed out measure.
5. If you have a different image on the back of your banner:
On the Front Side, in the Bleed out Section, flip your image horizontally and vertically to maintain a continous artwork on your back side.
Pole Pocket Dimensions
1", Bleed 3"
2"-9" - 4.5
3-13"- 6.5
4-17"-8.5
Pole Pocket's Holding Grommets: Holding grommets refers to our sliver nickel grommets placed on the edges right were the pole pocket starts. These grommets improve the strength of the pole pocket for heavier rods or poles. This option is also gives the banner the option to be hanged by the grommets when poles are not available.
Custom made width and height2 Business Days Turnaround24 Hour TurnaroundFull color printing at no extra chargeFinished with grommets or pole pockets